9.2: Strain Gages Choose the best answer in the questions below. Name Email 1. In Figure (a) strain gages 1 and 2 recorded strains of 700 and -800 micro, respectively. The normal strains areNormal strains in x and y directions are 700 and 800 micro, respectively.Normal strains in x and y directions are 700 and -800 micro, respectively.Normal strains in x and y directions are -700 and 800 micro, respectively.Normal strains in x and y directions are -700 and -800 micro, respectively.2. In Figure (b) strain gages 1 and 2 recorded strains of 700 and -800 micro, respectively. The normal strains areNormal strains in x and y directions are 700 and 800 micro, respectively.Normal strains in x and y directions are 700 and -800 micro, respectively.Normal strains in x and y directions are -700 and 800 micro, respectively.Normal strains in x and y directions are -700 and -800 micro, respectively.3. The angle that can be substituted in the strain transformation Equation 9.5 relating the strain gage reading to strains in Cartesian coordinates for Figure (c) is35 degrees125 degrees145 degrees55 degreesNone of the above4. The angle that can be substituted in the strain transformation Equation 9.5 relating the strain gage reading to strains in Cartesian coordinates for Figure (d) is35 degrees125 degrees145 degrees55 degreesNone of the above5. The angle that can be substituted in the strain transformation Equation 9.5 relating the strain gage reading to strains in Cartesian coordinates for Figure (e) is35 degrees125 degrees145 degrees55 degreesNone of the above6. A point in plane stress has the Mohr circle for strain shown in Figure (f). The modulus of elasticity of the material is E = 10,000 ksi and Poisson’s ratio is 0.25. The maximum shear strain is1100 micro1300 micro1900 micro1800 microNone of the above7. A point in plane stress has the Mohr circle for strain shown in Figure (g). The modulus of elasticity of the material is E = 10,000 ksi and Poisson’s ratio is 0.25. The maximum shear strain is1100 micro1300 micro1900 micro1800 microNone of the above8. A point in plane stress has the Mohr circle for strain shown in Figure (h). The modulus of elasticity of the material is E = 10,000 ksi and Poisson’s ratio is 0.25. The maximum shear strain is1100 micro1300 micro1900 micro1800 microNone of the above9. In plane strain there are two principal strains, but in plane stress there are three principal strains.TrueFalse10. The principal coordinate axis for stresses and strains is always the same, irrespective of the stress–strain relationship.TrueFalseDo you have any comments or suggestions? Please send them to author@madhuvable.org Time is Up!Time's up